Views and Events

Introduction to Views

As all data of the program is stored in objects, as explained in the Objects section, how are these objects exposed to the user ? We will try to answer this question in this section.

First of all, let’s note that every resource type uses its own interface. For example, the screen to modify a partner’s data is not the same as the one to modify an invoice.

Then, you have to know that the OpenERP user interface is dynamic, it means that it is not described “statically” by some code, but dynamically built from XML descriptions of the client screens.

From now on, we will call these screen descriptions views.

A notable characteristic of these views is that they can be edited at any moment (even during the program execution). After a modification to a displayed view has occurred, you simply need to close the tab corresponding to that ‘view’ and re-open it for the changes to appear.

Views principles

Views describe how each object (type of resource) is displayed. More precisely, for each object, we can define one (or several) view(s) to describe which fields should be drawn and how.

There are two types of views:

  1. form views
  2. tree views

Note

Since OpenERP 4.1, form views can also contain graphs.

Form views

The field disposition in a form view always follows the same principle. Fields are distributed on the screen following the rules below:

  • By default, each field is preceded by a label, with its name.
  • Fields are placed on the screen from left to right, and from top to bottom, according to the order in which they are declared in the view.
  • Every screen is divided into 4 columns, each column being able to contain either a label, or an “edition” field. As every edition field is preceded (by default) by a label with its name, there will be two fields (and their respective labels) on each line of the screen. The green and red zones on the screen-shot below, illustrate those 4 columns. They designate respectively the labels and their corresponding fields.

Views also support more advanced placement options:

  • A view field can use several columns. For example, on the screen-shot below, the zone in the blue frame is, in fact, the only field of a “one to many”. We will come back later on this note, but let’s note that it uses the whole width of the screen and not only one column.
  • We can also make the opposite operation: take a columns group and divide it in as many columns as desired. The surrounded green zones of the screen above are good examples. Precisely, the green framework up and on the right side takes the place of two columns, but contains 4 columns.

As we can see below in the purple zone of the screen, there is also a way to distribute the fields of an object on different tabs.

On Change

The on_change attribute defines a method that is called when the content of a view field has changed.

This method takes at least arguments: cr, uid, ids, which are the three classical arguments and also the context dictionary. You can add parameters to the method. They must correspond to other fields defined in the view, and must also be defined in the XML with fields defined this way:

<field name="name_of_field" on_change="name_of_method(other_field'_1_', ..., other_field'_n_')"/>

The example below is from the sale order view.

You can use the ‘context’ keyword to access data in the context that can be used as params of the function.:

<field name="shop_id" on_change="onchange_shop_id(shop_id)"/>
def onchange_shop_id(self, cr, uid, ids, shop_id):

    v={}
    if shop_id:

        shop=self.pool.get('sale.shop').browse(cr,uid,shop_id)
        v['project_id']=shop.project_id.id
        if shop.pricelist_id.id:

            v['pricelist_id']=shop.pricelist_id.id

        v['payment_default_id']=shop.payment_default_id.id

    return {'value':v}

When editing the shop_id form field, the onchange_shop_id method of the sale_order object is called and returns a dictionary where the ‘value’ key contains a dictionary of the new value to use in the ‘project_id’, ‘pricelist_id’ and ‘payment_default_id’ fields.

Note that it is possible to change more than just the values of fields. For example, it is possible to change the value of some fields and the domain of other fields by returning a value of the form: return {‘domain’: d, ‘value’: value}

returns:

a dictionary with any mix of the following keys:

domain

A mapping of {field: domain}.

The returned domains should be set on the fields instead of the default ones.

value

A mapping of {field: value}}, the values will be set on the corresponding fields and may trigger new onchanges or attrs changes

warning A dict with the keys title and message. Both

are mandatory. Indicate that an error message should be displayed to the user.

Tree views

These views are used when we work in list mode (in order to visualize several resources at once) and in the search screen. These views are simpler than the form views and thus have less options.

Search views

Search views are a new feature of OpenERP supported as of version 6.0 It creates a customized search panel, and is declared quite similarly to a form view, except that the view type and root element change to search instead of form.

Following is the list of new elements and features supported in search views.

Group tag

Unlike form group elements, search view groups support unlimited number of widget(fields or filters) in a row (no automatic line wrapping), and only use the following attributes:

  • expand: turns on the expander icon on the group (1 for expanded by default, 0 for collapsed)
  • string: label for the group
<group expand="1" string="Group By...">
   <filter string="Users" icon="terp-project" domain="[]" context="{'group_by':'user_id'}"/>
   <filter string="Project" icon="terp-project" domain="[]" context="{'group_by':'project_id'}"/>
   <separator orientation="vertical"/>
   <filter string="Deadline" icon="terp-project" domain="[]" context="{'group_by':'date_deadline'}"/>
</group>

In the screenshot above the green area is an expandable group.

Filter tag

Filters are displayed as a toggle button on search panel Filter elements can add new values in the current domain or context of the search view. Filters can be added as a child element of field too, to indicate that they apply specifically to that field (in this case the button’s icon will smaller)

In the picture above the red area contains filters at the top of the form while the blue area highlights a field and it’s child filter.

<filter string="Current" domain="[('state','in',('open','draft'))]" help="Draft, Open and Pending Tasks" icon="terp-project"/>
<field name="project_id" select="1" widget="selection">
    <filter domain="[('project_id.user_id','=',uid)]" help="My Projects" icon="terp-project"/>
</field>

Group By

<filter string="Project" icon="terp-project" domain="[]" context="{'group_by':'project_id'}"/>

Above filters groups records sharing the same project_id value. Groups are loaded lazily, so the inner records are only loaded when the group is expanded. The group header lines contain the common values for all records in that group, and all numeric fields currently displayed in the view are replaced by the sum of the values in that group.

It is also possible to group on multiple values by specifying a list of fields instead of a single string. In this case nested groups will be displayed:

<filter string="Project" icon="terp-project" domain="[]" context="{'group_by': ['project_id', 'user_id'] }"/>

Fields

Field elements in search views are used to get user-provided values for searches. As a result, as for group elements, they are quite different than form view’s fields:

  • a search field can contain filters, which generally indicate that both field and filter manage the same field and are related.

    Those inner filters are rendered as smaller buttons, right next to the field, and must not have a string attribute.

  • a search field really builds a domain composed of [(field_name, operator, field_value)]. This domain can be overridden in two ways:

    • @operator replaces the default operator for the field (which depends on its type)
    • @filter_domain lets you provide a fully custom domain, which will replace the default domain creation
  • a search field does not create a context by default, but you can provide an @context which will be evaluated and merged into the wider context (as with a filter element).

To get the value of the field in your @context or @filter_domain, you can use the variable self:

<field name="location_id" string="Location"
       filter_domain="['|',('location_id','ilike',self),('location_dest_id','ilike',self)]"/>

or

<field name="journal_id" widget="selection"
       context="{'journal_id':self, 'visible_id':self, 'normal_view':False}"/>

Range fields (date, datetime, time)

The range fields are composed of two input widgets (from and two) instead of just one.

This leads to peculiarities (compared to non-range search fields):

  • It is not possible to override the operator of a range field via @operator, as the domain is built of two sections and each section uses a different operator.

  • Instead of being a simple value (integer, string, float) self for use in @filter_domain and @context is a dict.

    Because each input widget of a range field can be empty (and the field itself will still be valid), care must be taken when using self: it has two string keys "from" and "to", but any of these keys can be either missing entirely or set to the value False.

Actions for Search view

After declaring a search view, it will be used automatically for all tree views on the same model. If several search views exist for a single model, the one with the highest priority (lowest sequence) will be used. Another option is to explicitly select the search view you want to use, by setting the search_view_id field of the action.

In addition to being able to pass default form values in the context of the action, OpenERP 6.0 now supports passing initial values for search views too, via the context. The context keys need to match the search_default_XXX format. XXX may refer to the name of a <field> or <filter> in the search view (as the name attribute is not required on filters, this only works for filters that have an explicit name set). The value should be either the initial value for search fields, or simply a boolean value for filters, to toggle them

<record id="action_view_task" model="ir.actions.act_window">
    <field name="name">Tasks</field>
    <field name="res_model">project.task</field>
    <field name="view_type">form</field>
    <field name="view_mode">tree,form,calendar,gantt,graph</field>
    <field eval="False" name="filter"/>
    <field name="view_id" ref="view_task_tree2"/>
    <field name="context">{"search_default_current":1,"search_default_user_id":uid}</field>
    <field name="search_view_id" ref="view_task_search_form"/>
</record>

Custom Filters

As of v6.0, all search views also features custom search filters, as show below. Users can define their own custom filters using any of the fields available on the current model, combining them with AND/OR operators. It is also possible to save any search context (the combination of all currently applied domain and context values) as a personal filter, which can be recalled at any time. Filters can also be turned into Shortcuts directly available in the User’s homepage.

In above screenshot we filter Partner where Salesman = Demo user and Country = Belgium, We can save this search criteria as a Shortcut or save as Filter.

Filters are user specific and can be modified via the Manage Filters option in the filters drop-down.

Graph views

A graph is a new mode of view for all views of type form. If, for example, a sale order line must be visible as list or as graph, define it like this in the action that open this sale order line. Do not set the view mode as “tree,form,graph” or “form,graph” - it must be “graph,tree” to show the graph first or “tree,graph” to show the list first. (This view mode is extra to your “form,tree” view and should have a separate menu item):

<field name="view_type">form</field>
<field name="view_mode">tree,graph</field>

view_type:

tree = (tree with shortcuts at the left), form = (switchable view form/list)

view_mode:

tree,graph : sequences of the views when switching

Then, the user will be able to switch from one view to the other. Unlike forms and trees, OpenERP is not able to automatically create a view on demand for the graph type. So, you must define a view for this graph:

<record model="ir.ui.view" id="view_order_line_graph">
   <field name="name">sale.order.line.graph</field>
   <field name="model">sale.order.line</field>
   <field name="type">graph</field>
   <field name="arch" type="xml">
         <graph string="Sales Order Lines">
              <field name="product_id" group="True"/>
              <field name="price_unit" operator="*"/>
        </graph>
    </field>
</record>

The graph view

A view of type graph is just a list of fields for the graph.

Graph tag

The default type of the graph is a pie chart - to change it to a barchart change <graph string=”Sales Order Lines”> to <graph string=”Sales Order Lines” type=”bar”> You also may change the orientation.

:Example :

<graph string="Sales Order Lines" orientation="horizontal" type="bar">

Field tag

The first field is the X axis. The second one is the Y axis and the optional third one is the Z axis for 3 dimensional graphs. You can apply a few attributes to each field/axis:

  • group: if set to true, the client will group all item of the same value for this field. For each other field, it will apply an operator

  • operator: the operator to apply is another field is grouped. By default it’s ‘+’. Allowed values are:

    • +: addition
    • *: multiply
    • **: exponent
    • min: minimum of the list
    • max: maximum of the list
Defining real statistics on objects:
 

The easiest method to compute real statistics on objects is:

  1. Define a statistic object which is a postgresql view
  2. Create a tree view and a graph view on this object

You can get en example in all modules of the form: report_.... Example: report_crm.

Controlling view actions

When defining a view, the following attributes can be added on the opening element of the view (i.e. <form>, <tree>...)

create
set to false to hide the link / button which allows to create a new record.
delete
set to false to hide the link / button which allows to remove a record.
edit
set to false to hide the link / button which allows to edit a record.

These attributes are available on form, tree, kanban and gantt views. They are normally automatically set from the access rights of the users, but can be forced globally in the view definition. A possible use case for these attributes is to define an inner tree view for a one2many relation inside a form view, in which the user cannot add or remove related records, but only edit the existing ones (which are presumably created through another way, such as a wizard).

Calendar Views

Calendar view provides timeline/schedule view for the data.

View Specification

Here is an example view:

<calendar color="user_id" date_delay="planned_hours" date_start="date_start" string="Tasks">
    <field name="name"/>
    <field name="project_id"/>
</calendar>

Here is the list of supported attributes for calendar tag:

string
The title string for the view.
date_start
A datetime field to specify the starting date for the calendar item. This attribute is required.
date_stop
A datetime field to specify the end date. Ignored if date_delay attribute is specified.
date_delay
A numeric field to specify time in hours for a record. This attribute will get preference over date_stop and date_stop will be ignored.
day_length
An integer value to specify working day length. Default is 8 hours.
color
A field, generally many2one, to colorize calendar/gantt items.
mode

A string value to set default view/zoom mode. For calendar view, this can be one of following (default is month):

  • day
  • week
  • month

Screenshots

Month Calendar:

Week Calendar:

Gantt Views

Gantt view provides timeline view for the data. Generally, it can be used to display project tasks and resource allocation.

A Gantt chart is a graphical display of all the tasks that a project is composed of. Each bar on the chart is a graphical representation of the length of time the task is planned to take.

A resource allocation summary bar is shown on top of all the grouped tasks, representing how effectively the resources are allocated among the tasks.

Color coding of the summary bar is as follows:

  • Gray shows that the resource is not allocated to any task at that time
  • Blue shows that the resource is fully allocated at that time.
  • Red shows that the resource is overallocated

View Specification

Here is an example view:

<gantt color="user_id" date_delay="planned_hours" date_start="date_start" string="Tasks">
    <level object="project.project" link="project_id" domain="[]">
        <field name="name"/>
    </level>
</gantt>

The attributes accepted by the gantt tag are similar to calendar view tag. The level tag is used to group the records by some many2one field. Currently, only one level is supported.

Here is the list of supported attributes for gantt tag:

string
The title string for the view.
date_start
A datetime field to specify the starting date for the gantt item. This attribute is required.
date_stop
A datetime field to specify the end date. Ignored if date_delay attribute is specified.
date_delay
A numeric field to specify time in hours for a record. This attribute will get preference over date_stop and date_stop will be ignored.
day_length
An integer value to specify working day length. Default is 8 hours.
color
A field, generally many2one, to colorize calendar/gantt items.
mode

A string value to set default view/zoom mode. For gantt view, this can be one of following (default is month):

  • day
  • 3days
  • week
  • 3weeks
  • month
  • 3months
  • year
  • 3years
  • 5years

The level tag supports following attributes:

object
An openerp object having many2one relationship with view object.
link
The field name in current object that links to the given object.
domain
The domain to be used to filter the given object records.

Drag and Drop

The left side pane displays list of the tasks grouped by the given level field. You can reorder or change the group of any records by dragging them.

The main content pane displays horizontal bars plotted on a timeline grid. A group of bars are summarized with a top summary bar displaying resource allocation of all the underlying tasks.

You can change the task start time by dragging the tasks horizontally. While end time can be changed by dragging right end of a bar.

Note

The time is calculated considering day_length so a bar will span more then one day if total time for a task is greater then day_length value.

Screenshots

Design Elements

The files describing the views are of the form:

Example:
<?xml version="1.0"?>
<openerp>
   <data>
       [view definitions]
   </data>
</openerp>

The view definitions contain mainly three types of tags:

  • <record> tags with the attribute model=”ir.ui.view”, which contain the view definitions themselves
  • <record> tags with the attribute model=”ir.actions.act_window”, which link actions to these views
  • <menuitem> tags, which create entries in the menu, and link them with actions

New : You can specify groups for whom the menu is accessible using the groups attribute in the menuitem tag.

New : You can now add shortcut using the shortcut tag.

Example:
<shortcut
    name="Draft Purchase Order (Proposals)"
    model="purchase.order"
    logins="demo"
    menu="m"/>

Note that you should add an id attribute on the menuitem which is referred by menu attribute.

<record model="ir.ui.view" id="v">
    <field name="name">sale.order.form</field>
    <field name="model">sale.order</field>
    <field name="priority" eval="2"/>
    <field name="arch" type="xml">
            <form string="Sale Order">
                .........
            </form>
    </field>
</record>

Default value for the priority field : 16. When not specified the system will use the view with the lower priority.

View Types

Tree View

You can specify the columns to include in the list, along with some details of the list’s appearance. The search fields aren’t specified here, they’re specified by the select attribute in the form view fields.

<record id="view_location_tree2" model="ir.ui.view">
    <field name="name">stock.location.tree</field>
    <field name="model">stock.location</field>
    <field name="type">tree</field>
    <field name="priority" eval="2"/>
    <field name="arch" type="xml">
        <tree
                colors="blue:usage=='view';darkred:usage=='internal'">

            <field name="complete_name"/>
            <field name="usage"/>
            <field
                name="stock_real"
                invisible="'product_id' not in context"/>
            <field
                name="stock_virtual"
                invisible="'product_id' not in context"/>
        </tree>
    </field>
</record>

That example is just a flat list, but you can also display a real tree structure by specifying a field_parent. The name is a bit misleading, though; the field you specify must contain a list of all child entries.

<record id="view_location_tree" model="ir.ui.view">
    <field name="name">stock.location.tree</field>
    <field name="model">stock.location</field>
    <field name="type">tree</field>
    <field name="field_parent">child_ids</field>
    <field name="arch" type="xml">
        <tree toolbar="1">
            <field icon="icon" name="name"/>
        </tree>
    </field>
</record>

On the tree element, the following attributes are supported:

colors
Conditions for applying different colors to items in the list. The default is black.
toolbar
Set this to 1 if you want a tree structure to list the top level entries in a separate toolbar area. When you click on an entry in the toolbar, all its descendants will be displayed in the main tree. The value is ignored for flat lists.

Grouping Elements

Separator

Adds a separator line

Example:
<separator string="Links" colspan="4"/>

The string attribute defines its label and the colspan attribute defines his horizontal size (in number of columns).

Notebook

<notebook>: With notebooks you can distribute the view fields on different tabs (each one defined by a page tag). You can use the tabpos properties to set tab at: up, down, left, right.

Example:
<notebook colspan="4">....</notebook>

Group

<group>: groups several columns and split the group in as many columns as desired.

  • colspan: the number of columns to use
  • rowspan: the number of rows to use
  • expand: if we should expand the group or not
  • col: the number of columns to provide (to its children)
  • string: (optional) If set, a frame will be drawn around the group of fields, with a label containing the string. Otherwise, the frame will be invisible.
Example:
<group col="3" colspan="2">
    <field name="invoiced" select="2"/>
    <button colspan="1" name="make_invoice" states="confirmed" string="Make Invoice"
        type="object"/>
</group>

Page

Defines a new notebook page for the view.

Example:
<page string="Order Line"> ... </page>:
  • string: defines the name of the page.

Data Elements

Field

attributes for the “field” tag

  • select="1": mark this field as being one of the search criteria for

    this resource’s search view. A value of 1 means that the field is included in the basic search, and a value of 2 means that it is in the advanced search.

  • colspan="4": the number of columns on which a field must extend.

  • readonly="1": set the widget as read only

  • required="1": the field is marked as required. If a field is marked as required, a user has to fill it the system won’t save the resource if the field is not filled. This attribute supersede the required field value defined in the object.

  • nolabel="1": hides the label of the field (but the field is not hidden in the search view).

  • invisible="True": hides both the label and the field.

  • password="True": replace field values by asterisks, “*”.

  • string="": change the field label. Note that this label is also used in the search view: see select attribute above).

  • domain: can restrict the domain.
    • Example: domain=”[(‘partner_id’,’=’,partner_id)]”
  • widget: can change the widget.
    • Example: widget=”one2many_list”
      • one2one_list
      • one2many_list
      • many2one_list
      • many2many
      • url
      • email
      • image
      • float_time
      • reference
  • mode: sequences of the views when switching.
    • Example: mode=”tree,graph”
  • on_change: define a function that is called when the content of the field changes.
    • Example: on_change=”onchange_partner(type,partner_id)”
    • See ViewsSpecialProperties for details
  • attrs: Permits to define attributes of a field depends on other fields of the same window. (It can be use on page, group, button and notebook tag also)
    • Format: “{‘attribute’:[(‘field_name’,’operator’,’value’),(‘field_name’,’operator’,’value’)],’attribute2’:[(‘field_name’,’operator’,’value’),]}”
    • where attribute will be readonly, invisible, required
    • Default value: {}.
    • Example: (in product.product)
    <field digits="(14, 3)" name="volume" attrs="{'readonly':[('type','=','service')]}"/>
    
  • eval: evaluate the attribute content as if it was Python code (see below for example)

  • default_focus: set to 1 to put the focus (cursor position) on this field when the form is first opened. There can only be one field within a view having this attribute set to 1 (new as of 5.2)

    <field name="name" default_focus=”1”/>
    

Example

Here’s the source code of the view of a sale order object. This is the same object as the object shown on the screen shots of the presentation.

Example:
<?xml version="1.0"?>
<openerp>
    <data>
    <record id="view_partner_form" model="ir.ui.view">
            <field name="name">res.partner.form</field>
            <field name="model">res.partner</field>
            <field name="type">form</field>
            <field name="arch" type="xml">
            <form string="Partners">
                <group colspan="4" col="6">
                    <field name="name" select="1"/>
                    <field name="ref" select="1"/>
                    <field name="customer" select="1"/>
                    <field domain="[('domain', '=', 'partner')]" name="title"/>
                    <field name="lang" select="2"/>
                    <field name="supplier" select="2"/>
                </group>
                <notebook colspan="4">
                    <page string="General">
                        <field colspan="4" mode="form,tree" name="address"
                         nolabel="1" select="1">
                            <form string="Partner Contacts">
                                <field name="name" select="2"/>
                                <field domain="[('domain', '=', 'contact')]" name="title"/>
                                <field name="function"/>
                                <field name="type" select="2"/>
                                <field name="street" select="2"/>
                                <field name="street2"/>
                                <newline/>
                                <field name="zip" select="2"/>
                                <field name="city" select="2"/>
                                <newline/>
                                <field completion="1" name="country_id" select="2"/>
                                <field name="state_id" select="2"/>
                                <newline/>
                                <field name="phone"/>
                                <field name="fax"/>
                                <newline/>
                                <field name="mobile"/>
                                <field name="email" select="2" widget="email"/>
                            </form>
                            <tree string="Partner Contacts">
                                <field name="name"/>
                                <field name="zip"/>
                                <field name="city"/>
                                <field name="country_id"/>
                                <field name="phone"/>
                                <field name="email"/>
                            </tree>
                        </field>
                        <separator colspan="4" string="Categories"/>
                        <field colspan="4" name="category_id" nolabel="1" select="2"/>
                    </page>
                    <page string="Sales &amp; Purchases">
                        <separator string="General Information" colspan="4"/>
                        <field name="user_id" select="2"/>
                        <field name="active" select="2"/>
                        <field name="website" widget="url"/>
                        <field name="date" select="2"/>
                        <field name="parent_id"/>
                        <newline/>
                    </page>
                    <page string="History">
                        <field colspan="4" name="events" nolabel="1" widget="one2many_list"/>
                    </page>
                    <page string="Notes">
                        <field colspan="4" name="comment" nolabel="1"/>
                    </page>
                </notebook>
            </form>
            </field>
        </record>
    <menuitem
            action="action_partner_form"
            id="menu_partner_form"
            parent="base.menu_base_partner"
            sequence="2"/>
    </data>
 </openerp>
The eval attribute

The eval attribute evaluate its content as if it was Python code. This allows you to define values that are not strings.

Normally, content inside <field> tags are always evaluated as strings.

Example 1:
<field name="value">2.3</field>

This will evaluate to the string '2.3' and not the float 2.3

Example 2:
<field name="value">False</field>

This will evaluate to the string 'False' and not the boolean False. This is especially tricky because Python’s conversion rules consider any non-empty string to be True, so the above code will end up storing the opposite of what is desired.

If you want to evaluate the value to a float, a boolean or another type, except string, you need to use the eval attribute:

<field name="value" eval="2.3" />
<field name="value" eval="False" />

Button

Adds a button to the current view. Allows the user to perform various actions on the current record.

After a button has been clicked, the record should always be reloaded.

Buttons have the following attributes:

@type

Defines the type of action performed when the button is activated:

workflow (default)

The button will send a workflow signal [1] on the current model using the @name of the button as workflow signal name and providing the record id as parameter (in a list).

The workflow signal may return an action descriptor, which should be executed. Otherwise it will return False.

object
The button will execute the method of name @name on the current model, providing the record id as parameter (in a list). This call may return an action descriptor to execute.
action

The button will trigger the execution of an action (ir.actions.actions). The id of this action is the @name of the button.

From there, follows the normal action-execution workflow.

@special

Only has one possible value currently: cancel, which indicates that the popup should be closed without performing any RPC call or action resolution.

Note

Only meaningful within a popup-type window (e.g. a wizard). Otherwise, is a noop.

Warning

@special and @type are incompatible.

@name
The button’s identifier, used to indicate which method should be called, which signal sent or which action executed.
@confirm
A confirmation popup to display before executing the button’s task. If the confirmation is dismissed the button’s task must not be executed.
@string
The label which should be displayed on the button [2].
@icon
Display an icon on the button, if absent the button is text-only [3].
@states, @attrs, @invisible
Standard OpenERP meaning for those view attributes
@default_focus

If set to a truthy value (1), automatically selects that button so it is used if RETURN is pressed while on the form.

May be ignored by the client.

New in version 6.0.

Example:
<button name="order_confirm" states="draft" string="Confirm Order" icon="gtk-execute"/>
<button name="_action_open_window" string="Open Margins" type="object" default_focus=”1”/>

Label

Adds a simple label using the string attribute as caption.

Example:
<label string="Test"/>

New Line

Force a return to the line even if all the columns of the view are not filled in.

Example:
<newline/>
[1]via exec_workflow on the object rpc endpoint
[2]in form view, in list view buttons have no label
[3]behavior in list view is undefined, as list view buttons don’t have labels.

Inheritance in Views

When you create and inherit objects in some custom or specific modules, it is better to inherit (than to replace) from an existing view to add/modify/delete some fields and preserve the others.

Example:
<record model="ir.ui.view" id="view_partner_form">
    <field name="name">res.partner.form.inherit</field>
    <field name="model">res.partner</field>
    <field name="inherit_id" ref="base.view_partner_form"/>
    <field name="arch" type="xml">
        <notebook position="inside">
            <page string="Relations">
                <field name="relation_ids" colspan="4" nolabel="1"/>
            </page>
        </notebook>
    </field>
</record>

This will add a page to the notebook of the res.partner.form view in the base module.

The inheritance engine will parse the existing view and search for the root nodes of

<field name="arch" type="xml">

It will append or edit the content of this tag. If this tag has some attributes, it will look in the parent view for a node with matching attributes (except position).

You can use these values in the position attribute:

  • inside (default): your values will be appended inside the tag
  • after: add the content after the tag
  • before: add the content before the tag
  • replace: replace the content of the tag.

Replacing Content

<record model="ir.ui.view" id="view_partner_form1">
    <field name="name">res.partner.form.inherit1</field>
    <field name="model">res.partner</field>
    <field name="inherit_id" ref="base.view_partner_form"/>
    <field name="arch" type="xml">
        <page string="Extra Info" position="replace">
            <field name="relation_ids" colspan="4" nolabel="1"/>
        </page>
    </field>
</record>

Will replace the content of the Extra Info tab of the notebook with the relation_ids field.

The parent and the inherited views are correctly updated with --update=all argument like any other views.

Deleting Content

To delete a field from a form, an empty element with position="replace" attribute is used. Example:

<record model="ir.ui.view" id="view_partner_form2">
    <field name="name">res.partner.form.inherit2</field>
    <field name="model">res.partner</field>
    <field name="inherit_id" ref="base.view_partner_form"/>
    <field name="arch" type="xml">
        <field name="lang" position="replace"/>
    </field>
</record>

Inserting Content

To add a field into a form before the specified tag use position="before" attribute.

<record model="ir.ui.view" id="view_partner_form3">
    <field name="name">res.partner.form.inherit3</field>
    <field name="model">res.partner</field>
    <field name="inherit_id" ref="base.view_partner_form"/>
    <field name="arch" type="xml">
        <field name="lang" position="before">
            <field name="relation_ids"/>
        </field>
    </field>
</record>

Will add relation_ids field before the lang field.

To add a field into a form after the specified tag use position="after" attribute.

<record model="ir.ui.view" id="view_partner_form4">
    <field name="name">res.partner.form.inherit4</field>
    <field name="model">res.partner</field>
    <field name="inherit_id" ref="base.view_partner_form"/>
    <field name="arch" type="xml">
        <field name="lang" position="after">
            <field name="relation_ids"/>
        </field>
    </field>
</record>

Will add relation_ids field after the lang field.

Multiple Changes

To make changes in more than one location, wrap the fields in a data element.

<record model="ir.ui.view" id="view_partner_form5">
    <field name="name">res.partner.form.inherit5</field>
    <field name="model">res.partner</field>
    <field name="inherit_id" ref="base.view_partner_form"/>
    <field name="arch" type="xml">
        <data>
            <field name="lang" position="replace"/>
            <field name="website" position="after">
                <field name="lang"/>
            </field>
        </data>
    </field>
</record>

Will delete the lang field from its usual location, and display it after the website field.

XPath Element

Sometimes a view is too complicated to let you simply identify a target field by name. For example, the field might appear in two places. When that happens, you can use an xpath element to describe where your changes should be placed.

<record model="ir.ui.view" id="view_partner_form6">
    <field name="name">res.partner.form.inherit6</field>
    <field name="model">res.partner</field>
    <field name="inherit_id" ref="base.view_partner_form"/>
    <field name="arch" type="xml">
        <data>
            <xpath
                expr="//field[@name='address']/form/field[@name='email']"
                position="after">
                <field name="age"/>
            </xpath>
            <xpath
                expr="//field[@name='address']/tree/field[@name='email']"
                position="after">
                <field name="age"/>
            </xpath>
        </data>
    </field>
</record>

Will add the age field after the email field in both the form and tree view of the address list.

Specify the views you want to use

There are some cases where you would like to specify a view other than the default:

  • If there are several form or tree views for an object.
  • If you want to change the form or tree view used by a relational field (one2many for example).

Using the priority field

This field is available in the view definition, and is 16 by default. By default, OpenERP will display a model using the view with the highest priority (the smallest number). For example, imagine we have two views for a simple model. The model client with two fields : firstname and lastname. We will define two views, one which shows the firstname first, and the other one which shows the lastname first.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
<!--
    Here is the first view for the model 'client'.
    We don't specify a priority field, which means
    by default 16.
-->
<record model="ir.ui.view" id="client_form_view_1">
    <field name="name">client.form.view1</field>
    <field name="model">client</field>
    <field name="type">form</fiel>
    <field name="arch" type="xml">
        <field name="firstname"/>
        <field name="lastname"/>
    </field>
</record>

<!--
    A second view, which show fields in an other order.
    We specify a priority of 15.
-->
<record model="ir.ui.view" id="client_form_view_2">
    <field name="name">client.form.view2</field>
    <field name="model">client</field>
    <field name="priority" eval="15"/>
    <field name="type">form</fiel>
    <field name="arch" type="xml">
        <field name="lastname"/>
        <field name="firstname"/>
    </field>
</record>

Now, each time OpenERP will have to show a form view for our object client, it will have the choice between two views. It will always use the second one, because it has a higher priority ! Unless you tell it to use the first one !

Specify per-action view

To illustrate this point, we will create 2 menus which show a form view for this client object :

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
<!--
    This action open the default view (in our case,
    the view with the highest priority, the second one)
-->
<record
    model="ir.actions.act_window"
    id="client_form_action">
    <field name="name">client.form.action</field>
    <field name="res_model">client</field>
    <field name="view_type">form</field>
    <field name="view_mode">form</field>
</record>

<!--
    This action open the view we specify.
-->
<record
    model="ir.actions.act_window"
    id="client_form_action1">
    <field name="name">client.form.action1</field>
    <field name="res_model">client</field>
    <field name="view_type">form</field>
    <field name="view_mode">form</field>
    <field name="view_id" ref="client_form_view_1"/>
</record>

<menuitem id="menu_id" name="Client main menu"/>
<menuitem
    id="menu_id_1"
    name="Here we don't specify the view"
    action="client_form_action" parent="menu_id"/>
<menuitem
    id="menu_id_1"
    name="Here we specify the view"
    action="client_form_action1" parent="menu_id"/>

As you can see on line 19, we can specify a view. That means that when we open the second menu, OpenERP will use the form view client_form_view_1, regardless of its priority.

Note

Remember to use the module name (module.view_id) in the ref attribute if you are referring to a view defined in another module.